SK Enterprises Manufacturer of Industrial Magnetizers & Magnetic Instruments — Maharashtra, India

Magnetizer Fixtures, Coils & Yokes

The magnetizer coil or fixture — also called a magnetizing coil, fixture or yoke — is where the magnetic field is created. Its shape decides the pole pattern, its winding decides the field strength, and its construction decides how long it lasts in production. SK Enterprises designs and manufactures coils, fixtures and yokes matched to your part and to the magnetizer that drives them.

Product range

Our magnetizer fixtures, coils & yokes range

4 product types — open any product for specifications, applications and FAQs.

Buying guide

Choosing magnetizer fixtures, coils & yokes

Choosing the right coil or fixture

Type Typical use
Multi-pole magnetizer fixture Ring magnets, encoder magnets, rotors with several poles
BLDC rotor magnetizer fixture Assembled BLDC and PMSM rotors, radial multi-pole magnetization after assembly
Speaker magnetizer fixture Loudspeaker magnet circuits, ferrite ring and neodymium designs, magnetized after assembly
Motor housing magnetizer fixture DC motor housings and stators with arc magnets, magnetized after assembly
Magnetizer coil Loose ferrite and NdFeB magnets, axial magnetization, magnet charging in batches

Coil, fixture or magnetizer yoke?

The names overlap in everyday use. A coil is a plain solenoid that magnetizes along its axis. A fixture is built around one part to give a radial or multi-pole pattern. A yoke adds steel pole pieces that carry the field to the magnet, which is useful for thin, flat parts or for poles on one face only. Which one suits your part depends on the magnetization direction you need — our guide to radial, axial and diametrical magnetization explains the differences.

What decides fixture performance

  • Conductor size and turns — set the field strength and the current the fixture must carry.
  • Pole geometry — sets how sharply and accurately the poles are formed.
  • Mechanical strength — the pulse creates large forces inside the fixture, so it must be well supported.
  • Cooling — natural, forced-air or water cooling determines how fast you can cycle.

Learn more about multi-pole magnetizers or see how fixtures are used in a rotor magnetizer.

Designed for your part

Send your part drawing or a sample and we will design a fixture to suit it and your magnetizer.

FAQs

Magnetizer Fixtures, Coils & Yokes — frequently asked questions

What is the difference between a magnetizer coil and a fixture?

A coil is usually a solenoid that creates a uniform axial field — ideal for loose magnets magnetized through their thickness. A fixture is shaped around a specific part, such as a rotor or motor housing, to create a radial or multi-pole pattern.

What is a magnetizer yoke?

A yoke uses shaped steel pole pieces to guide the field from the winding into the magnet. The term is often used for fixtures that magnetize across a short gap or form poles on one face or surface of a part, and many people use "yoke" and "fixture" to mean the same thing.

Can a fixture be used with any magnetizer?

A fixture must be matched to the magnetizer's voltage, energy and current. Using a fixture outside its design limits can overheat or damage it. Share your magnetizer details if you need a fixture for an existing machine.

How long does a magnetizer fixture last?

Life depends on the energy per pulse, the cycle rate and cooling. Fixtures designed with the right margins and cooling can run for very large numbers of pulses; overloading them shortens life sharply.

What do you need to design a fixture?

A part drawing, the magnet material and grade, the required pole pattern and number of poles, and your production rate. A sample part helps.

Knowledge centre

Guides about magnetizer fixtures, coils & yokes

All guides

Get a quote for magnetizer fixtures, coils & yokes

Share your part drawing and magnet details. SK Enterprises manufactures in Maharashtra for customers across India.

WhatsApp Us