SK Enterprises Manufacturer of Industrial Magnetizers & Magnetic Instruments — Maharashtra, India

Magnetizer Fixtures, Coils & Yokes

Motor Housing Magnetizer Fixture for PMDC Motors

A motor housing magnetizer fixture fits inside the steel housing of a permanent magnet DC (PMDC) motor and magnetizes the arc magnets already glued or clipped in place. One pulse from the magnetizer drives a radial field through each arc, with the housing itself carrying the return flux. SK Enterprises designs and manufactures housing fixtures in Maharashtra for automotive, two-wheeler and appliance motor makers across India.

  • Magnetizes ferrite arc segments after they are fitted in the housing
  • 2-pole and 4-pole fixtures matched to your arc layout
  • Housing located so each pole is centred on its arc
  • Built to run with a capacitor discharge magnetizer
Pole configuration
2-pole or 4-pole, radial from inside
Typical parts
PMDC motor housings (stators) with ferrite arc segments; bonded magnet rings in some compact motors
Magnetization direction
Radial, from inside the housing; the steel housing forms the flux return path
  • Direct from manufacturer
  • Built to your part
  • Application support

Product overview

About Motor Housing Magnetizer Fixture for PMDC Motors

How a motor housing magnetizer works

In a permanent magnet DC (PMDC) motor, ferrite arc magnets are glued or clipped to the inside of a steel housing, which forms the stator. A housing magnetizer fixture is an insert that slides into the housing bore. When a capacitive discharge impulse magnetizer fires through it, the fixture drives a radial field through each arc, and the steel housing carries the flux back round — just as it does in the running motor.

The housing is usually magnetized as a sub-assembly, after the arcs are fixed and before the armature goes in. This keeps steel debris off the magnets and stops brittle ferrite arcs from snapping onto tooling or chipping during fitting. On most DC motor lines, this fixture and a magnetizer together form the DC motor magnet charging station. See motor housing magnetizers for how the step fits into the line.

2-pole and 4-pole housings

A 2-pole motor typically has two arcs, one presenting a north pole and the other a south pole to the armature. A 4-pole motor has four arcs alternating around the bore. The fixture must match the arc count and placement exactly: each pole should be centred on its arc, with the pole transitions falling in the gaps between arcs. Locating the housing from its own features — a notch, tab or mounting hole — keeps every part aligned the same way.

Ferrite arcs typically need a field of about 1–1.5 T to saturate. Some compact motors use bonded NdFeB rings instead of arcs; these need a stronger field, and the fixture and magnetizer are sized accordingly.

What we need to design your fixture

Input Why it matters
Housing drawing (inner diameter, length, wall thickness) Sets the fixture size and the return path through the housing wall
Number, span and position of arcs Decides the pole count and where each pole is centred
Magnet material and grade Sets the field, and therefore the energy, required
Locating features on the housing Gives repeatable pole alignment from part to part
Output per shift Decides cooling and the loading method
Existing magnetizer details The fixture must suit its voltage, current and energy

Production and quality

Cycle rate and cooling

Cycle rate is limited by capacitor recharge time and by the heat that builds up in the fixture windings. Natural cooling suits lower rates; forced-air or water cooling keeps the windings within temperature on continuous lines. Our article on magnetizer safety and maintenance covers inspecting and caring for fixtures in daily use.

Checking the result

A gauss reading at the centre of each arc, peak-current monitoring of every pulse and a no-load speed and current test on the finished motor are common ways to confirm full, correctly aligned magnetization. For BLDC motors, where the magnets sit on the rotor rather than in the housing, see our BLDC rotor magnetizer.

Motor housing magnetizer fixtures for manufacturers in Maharashtra and India

SK Enterprises designs and manufactures housing fixtures within its magnetizer fixtures and coils range, for makers of wiper, blower, starter, fan and two-wheeler motors in Maharashtra and across India. The price of a motor housing magnetizer fixture depends on housing size, pole count, cooling and loading method, so send your drawing for a quotation.

Request a quotation for a motor housing magnetizer fixture.

Specifications

Motor Housing Magnetizer Fixture for PMDC Motors specifications

Typical technical specifications
Typical parts PMDC motor housings (stators) with ferrite arc segments; bonded magnet rings in some compact motors
Magnetization direction Radial, from inside the housing; the steel housing forms the flux return path
Pole count Commonly 2 or 4 poles, matched to the number and placement of the arcs
Typical field to saturate Approx. 1 – 1.5 T for ferrite arcs; higher for bonded NdFeB
Pole alignment Housing located from its own features so each pole centres on an arc
Construction Conductors and pole pieces on an insert sized to the housing bore, encapsulated and reinforced against pulse forces
Magnetization stage Commonly the housing sub-assembly, before the armature is fitted
Cooling Natural, forced-air or water cooling to suit the cycle rate
Quality checks Gauss reading at each arc, peak-current monitoring, no-load test of the finished motor

Typical values for this product type, for reference. Exact values depend on grade, size and design — confirm with our team before ordering.

Models & supply from SK Enterprises
Housing sizes On request
Pole configurations On request
Magnet types On request
Loading & location On request
Cooling options On request
Compatible magnetizers On request
Lead time On request

Sizes & variants

Common types and variants

2-pole housing fixtures

For housings with two arc magnets, one north and one south, common in small and medium PMDC motors.

4-pole housing fixtures

For housings with four alternating arcs, often used in larger or higher-torque motor designs.

Bonded-ring housing fixtures

For compact motors that use a one-piece bonded magnet ring instead of separate arcs.

Water-cooled production fixtures

For high-volume lines where frequent pulsing would otherwise overheat the windings.

Applications

Applications of Motor Housing Magnetizer Fixture for PMDC Motors

  • Wiper and window-lift motors

    Automotive PMDC motors magnetized after the arcs are fixed in the housing.

  • Blower and cooling fan motors

    HVAC blower and radiator fan motors built in high volumes.

  • Starter motors

    Permanent magnet starter motors for cars and two-wheelers.

  • Appliance and general DC motors

    Small PMDC motors for appliances, pumps and equipment.

Features & benefits

Motor Housing Magnetizer Fixture for PMDC Motors features & benefits

Key features

  • Built to your housing Bore, length, arc span and locating features are taken from your housing drawing.
  • Accurate pole placement Poles are centred on the arcs, with the pole transitions falling in the gaps between them.
  • Pulse-rated construction Conductors and pole pieces are supported against the forces of each pulse.
  • Straightforward loading The housing slides over the fixture and seats against a stop.

Benefits for your business

  • Easier arc fitting Unmagnetized arcs do not snap onto the housing or each other, so brittle ferrite is less likely to chip.
  • No debris inside the motor Steel particles do not collect on the magnets before the armature goes in.
  • Consistent motor output Fully magnetized arcs help keep no-load speed and torque within specification.
  • Lower handling cost Unmagnetized arcs are easier to store, ship and feed to the assembly line.

Industries served

Industries that use Motor Housing Magnetizer Fixture for PMDC Motors

Get the right Motor Housing Magnetizer Fixture for PMDC Motors for your application

Send your part drawing, magnet material and output per shift. Our engineers will recommend the right configuration and send a quotation.

FAQs

Motor Housing Magnetizer Fixture for PMDC Motors — frequently asked questions

Why magnetize the housing after the arcs are fitted?

Fitting unmagnetized arcs is quicker and cleaner — they do not jump onto the housing, attract steel chips or chip against each other. A single magnetizer pulse on the finished sub-assembly also gives every housing the same treatment.

What is the difference between a 2-pole and a 4-pole housing fixture?

A 2-pole fixture creates one north and one south pole for a housing with two arcs; a 4-pole fixture creates four alternating poles for four arcs. The fixture must match the number and position of the arcs, so one cannot be used in place of the other.

Can one fixture handle housings of different lengths?

Often yes, if the housings share the same inner diameter, arc layout and pole count and the fixture is long enough for the longest stack of arcs. Housings with a different bore or arc arrangement need their own fixture.

Is the housing magnetized before or after the armature is fitted?

Commonly before. The fixture needs the housing bore to be free, so the usual sequence is to magnetize the housing sub-assembly and then fit the armature. Magnetization of a fully assembled motor is a different approach and needs to be assessed for each design.

How do we check that a housing is correctly magnetized?

Typical checks are a gauss reading at the centre of each arc, peak-current monitoring of every pulse and a no-load speed and current test on the finished motor. Comparing with a reference housing shows up weak or misaligned poles.

Can a housing fixture be used with our existing magnetizer?

Yes, if it is designed for that machine's voltage, current and energy. Share the magnetizer make and ratings with your housing drawing so the fixture can be matched to it.

Related products

All products

Knowledge centre

Guides about Motor Housing Magnetizer Fixture for PMDC Motors

Get a quote

Request details for Motor Housing Magnetizer Fixture for PMDC Motors

Fill in what you know — our team will follow up with a recommended configuration, price and delivery time.

We’ll call or WhatsApp you on this number.
PDF, Word, Excel or image — max 5 MB.

Prefer to talk?

Call or WhatsApp us with your requirement — we’ll help you choose the right magnetizer and fixture.

WhatsApp Us