SK Enterprises Manufacturer of Industrial Magnetizers & Magnetic Instruments — Maharashtra, India

Testing & Measuring Instruments

Digital Fluxmeter (Magnetic Flux Meter)

A digital fluxmeter, or magnetic flux meter, measures magnetic flux — the total magnetism a magnet or magnetized part produces — rather than the field at a single point. It works with a search coil or a Helmholtz coil: as the part is moved into or out of the coil, the changing flux induces a small voltage, and the fluxmeter integrates that voltage to give the flux in webers or maxwells. SK Enterprises manufactures digital fluxmeters for magnet makers and for manufacturers who check magnetized parts on their own lines.

  • Measures the total magnetic flux of a magnet or magnetized assembly
  • Works with search coils, Helmholtz coils and part-specific test coils
  • Reads in webers, milliwebers or maxwells
  • Zero adjustment for repeatable readings, batch after batch
Measures
Total flux (Wb / Mx)
Principle
Electronic integration of the voltage induced in a search coil
Units
Weber (Wb), milliweber (mWb), maxwell (Mx) — 1 Wb = 100,000,000 Mx
  • Direct from manufacturer
  • Built to your part
  • Application support

Product overview

About Digital Fluxmeter

How a digital fluxmeter works

A fluxmeter is connected to a search coil — a coil of wire that surrounds the part or the space where the part is placed. When the flux through the coil changes, for example when a magnet is pushed in or pulled out, a small voltage appears across the coil. The fluxmeter integrates that voltage over time and divides by the number of turns, which gives the change in flux. Because the result depends only on the flux at the start and the end, not on how fast the part is moved, readings are repeatable from one operator to the next.

Fluxmeter and Helmholtz coil

With a Helmholtz coil, a fluxmeter measures the magnetic moment of a magnet. Dividing the moment by the magnet’s volume gives its magnetization, which can be compared with the values expected for its grade. This is a quick way to check incoming magnets or to compare suppliers without cutting or destroying samples.

Using a fluxmeter after magnetization

A fluxmeter is the simplest way to prove that a magnetizer setting is right. Magnetize test parts at increasing charging voltages and measure each one: when the flux stops rising, the part is saturated. In production, measuring parts in a test coil and comparing the result with limits shows straight away if a part was not fully magnetized. Learn more about how a capacitor discharge magnetizer works.

Made by SK Enterprises

SK Enterprises manufactures digital fluxmeters for laboratories, goods inward and production lines. Tell us what you need to measure and the size of your parts, and we will recommend a fluxmeter and coil. Request a quotation for a digital fluxmeter.

Specifications

Digital Fluxmeter specifications

Typical technical specifications
Principle Electronic integration of the voltage induced in a search coil
Measures Magnetic flux (Φ) linked with the coil
Units Weber (Wb), milliweber (mWb), maxwell (Mx) — 1 Wb = 100,000,000 Mx
Coils Helmholtz coil for magnetic moment; search or test coils for parts and assemblies
Typical uses Comparing magnets and assemblies, saturation checks, go / no-go testing
Display Digital, with zero and drift adjustment

Typical values for this product type, for reference. Exact values depend on grade, size and design — confirm with our team before ordering.

Models & supply from SK Enterprises
Models and ranges On request
Coils supplied On request
Limits and outputs On request
Built into magnetizers On request
Calibration On request
Warranty On request
Lead time On request

Sizes & variants

Common types and variants

Bench fluxmeters

Desktop instruments for laboratories, goods inward and quality control.

Fluxmeters with Helmholtz coil

Measure the magnetic moment of a magnet and, with its volume, compare its magnetization against the grade.

Production fluxmeters

Fluxmeters with limit settings that give a pass / fail result for each part.

Applications

Applications of Digital Fluxmeter

  • Magnet quality control

    Compare magnets from different batches or suppliers by their total flux.

  • Checking magnetized assemblies

    Confirm that rotors, housings and speaker assemblies are fully magnetized by measuring their flux in a test coil.

  • Magnetizer setup

    Find the charging voltage at which a part saturates — the point where the flux stops rising as the voltage is increased.

  • Incoming inspection

    Check that purchased magnets meet the agreed flux before they reach the line.

Features & benefits

Digital Fluxmeter features & benefits

Key features

  • Integrating measurement The whole flux of the part is measured, not one point, so readings depend less on exactly where the part is held.
  • Works with your coils Use a Helmholtz coil, a simple search coil or a test coil built around your part.
  • Zero and drift control Keep the reading steady while parts are measured one after another.
  • Clear digital readout Flux values that operators can record or compare against limits.

Benefits for your business

  • Reliable pass / fail decisions Total flux follows closely how a magnet will perform in the finished product.
  • Less operator influence Moving a part through a coil is more repeatable than placing a point probe by hand.
  • Proof of saturation Show that your magnetizer settings fully magnetize every part.
  • Direct from the manufacturer Work with the team that builds the instrument for coils, calibration and support.

Industries served

Industries that use Digital Fluxmeter

Get the right Digital Fluxmeter for your application

Tell us what you need to measure and the size of your parts. Our engineers will recommend the right model and send a quotation.

FAQs

Digital Fluxmeter — frequently asked questions

What does a fluxmeter measure?

It measures magnetic flux — the total magnetism passing through a coil. When a magnet is moved into or out of a search coil, the fluxmeter integrates the voltage induced in the coil and shows the change in flux in webers or maxwells.

How is a fluxmeter different from a gaussmeter?

A gaussmeter measures the field at one point with a Hall probe. A fluxmeter measures the total flux of the whole magnet or part through a coil, so it is better for comparing the overall strength of magnets and assemblies.

What is a Helmholtz coil used for?

A Helmholtz coil is a pair of coils that gives the same sensitivity over the space between them. Moving a magnet into or out of that space gives a fluxmeter reading that depends on the magnet's magnetic moment, not on its exact position, which makes magnets easy to compare.

Why does a fluxmeter reading drift?

A fluxmeter integrates the coil voltage over time, so even a tiny offset adds up and the reading slowly creeps. Zeroing the meter and the drift adjustment just before each measurement, and taking the reading promptly, keeps results accurate.

What is the price of a digital fluxmeter?

The price depends on the range and resolution, the coils supplied, limit and data outputs, and whether the fluxmeter is built into a magnetizer. Tell us what you need to measure and we will send a quotation.

Related products

All products

Get a quote

Request details for Digital Fluxmeter

Fill in what you know — our team will follow up with a recommended configuration, price and delivery time.

We’ll call or WhatsApp you on this number.
PDF, Word, Excel or image — max 5 MB.

Prefer to talk?

Call or WhatsApp us with your requirement — we’ll help you choose the right magnetizer and fixture.

WhatsApp Us