SK Enterprises Manufacturer of Industrial Magnetizers & Magnetic Instruments — Maharashtra, India

Industry

Sensors & Electronics

Sensor magnets are small, but their pole pattern is the signal. SK Enterprises builds magnetizer fixtures and charging machines for encoder rings, Hall sensor magnets and reed switch magnets, where pole position and strength must repeat from part to part.

Key requirements

Key magnetizer requirements

01

Precise pole pitch

Encoder and speed-sensor rings rely on evenly spaced poles, and any pitch error appears directly in the signal.

02

Fine fixture detail for small parts

Small magnets with many poles need fixtures with fine conductors placed close to the magnet surface.

03

Consistent field strength

A sensor's switching point depends on the magnet's field, so every magnet must be magnetized to the same level.

04

Fast verification

Magnetic viewing film, Hall probe scans and gauss readings confirm pole pattern and strength quickly.

Magnetizers for sensing applications

In a sensor, the magnet is part of the measurement. An encoder counts poles, a Hall sensor switches at a set field and a reed switch closes when the magnet comes within range. Any variation in pole position or strength shows up as variation in the signal, which is why many sensor makers prefer to magnetize in-house, where they control the process.

Common sensor magnets

Multi-pole encoder and speed rings

These are ring magnets, often bonded NdFeB, bonded ferrite or rubber-bonded ferrite, magnetized with many poles on the outer diameter or on one face. They are magnetized with a multi-pole magnetizer fixture built for the exact pole count and diameter. Our page on multi-pole magnetizers explains how pole accuracy is controlled.

Hall sensor and angle sensor magnets

Small discs and blocks, magnetized axially or diametrically, set the field the sensor detects. The magnet’s strength and alignment decide where, and how reliably, the sensor switches.

Reed switch and meter magnets

Simple block, rod and ring magnets used to trigger reed switches, or for coupling and sensing in meters, are usually charged in a magnetizer coil driven by a capacitor discharge magnetizer.

Getting repeatable results

  • Material and orientation: isotropic magnets accept any pole pattern, while anisotropic magnets must be magnetized along the direction they were oriented in.
  • Fixture precision: for fine pole pitches, the conductors sit close to the magnet surface and must be precisely located, and the part must be held the same way every time.
  • Verification: magnetic viewing film shows the pole pattern at a glance, and a Hall probe scan measures pole position and field strength.

Our article on how multi-pole fixtures create fine pole patterns covers fixture design in more detail.

Enquire about magnetizers for sensor magnets

SK Enterprises is a magnetizer and fixture manufacturer based in Maharashtra, India. Send us your magnet drawing, material, required pole pattern and quantities. Contact us to discuss your part.

Relevant products

Products for sensors & electronics

FAQs

Frequently asked questions

What is a multi-pole sensor magnet?

A ring or disc magnetized with several alternating north and south poles around its circumference or across one face. As it turns past a Hall or magnetoresistive sensor, each pole produces a change in the signal.

How are diametrically magnetized discs made?

A disc used for angle sensing is magnetized across its diameter, giving one north and one south pole. The field has to be applied across the disc rather than through its thickness, so the coil or fixture and the holder are arranged accordingly.

Can reed switch magnets be magnetized in batches?

Yes. Small magnets for reed switches and proximity sensors are usually charged several at a time in a magnetizer coil, using a non-magnetic holder that keeps them in the same orientation.

Talk to our engineers about your requirement

Share what you need to magnetize — part, magnet material, pole pattern and output. We will recommend a machine and send a quotation.

WhatsApp Us